KONSTRUKT

Renovations

Catalan vaults in a renovation: restore, reinforce or cover

· 7 min

Worker checking a wall is flat with a spirit level during a renovation

If opening the ceiling of an old Barcelona flat reveals beams with small brick vaults between them, you have a revoltón floor, what estate agents usually call Catalan vaults (bóvedas catalanas). There are three options: restore it and leave it exposed if the beams and brickwork are sound, reinforce it if a technician finds damage, or cover it with a suspended ceiling to run services or add insulation. The decision always starts with a technical inspection, because this is the building's structure and any work on it needs a technician and a licence.

What exactly a Catalan vault is

The Catalan vault (volta catalana), or timbrel vault, is built with thin bricks laid flat and bonded with fast-setting gypsum, in one or more layers, which allows it to be raised with almost no formwork. In flats in the Eixample, Gràcia, Sant Antoni or Poble-sec, what you see is almost always a variant: the revoltón floor, in which parallel beams resting on the load-bearing walls carry small brick vaults, filled on top to form the floor of the flat above. Common variants:

  • Timber beams with brick vaults: common in the oldest buildings. The beams are usually fairly close together, with their ends built into the walls.
  • Steel beams with brick vaults: iron or steel I-sections, common in many buildings from the late 19th and early 20th centuries.
  • Larger timbrel vaults: in staircases, basements or some ground floors, where a single vault spans the whole room.

How to tell what is above you

In many flats the vault is hidden behind a suspended ceiling of reed lath and plaster (cielo raso) hung from the beams, or a later false ceiling. Useful clues:

  • Knock on the ceiling: a lath ceiling sounds hollow; a vault plastered directly sounds more solid.
  • Look inside cupboards, lofts or gallery ceilings, where the lath ceiling has sometimes fallen or was never built.
  • Make an inspection opening: a small hole in the lath ceiling, in an area that will be redone anyway, is enough to see what the beams are made of and the state of the brickwork.
  • Hold a magnet to an exposed beam: if it sticks, the beam is metal.
  • Ask the property manager for the building's plans, if they exist.

Common problems and the confusion with aluminosis

Damage to a revoltón floor almost always comes from water. An old leak from the bathroom above, a roof that let water in or a badly waterproofed courtyard may have harmed the beams for years without anything showing:

  • Timber beams: rot or wood-boring insects, especially at the ends built into the wall, which is exactly where the beam bears.
  • Steel beams: corrosion. Rust expands and can crack the vault or loosen the brick next to the beam.
  • Warning signs: visible sagging, cracks running parallel to the beams, loose bricks or old damp stains.

Aluminosis is a different matter. It affects concrete made with high-alumina cement, mainly precast joists in some mid-20th-century buildings. It has nothing to do with a floor of timber or iron beams and brick vaults, although if your building has concrete joists from that period a technician should check them.

Restore, reinforce or cover

  • Restore and expose. The lath ceiling comes down, the brick is cleaned, joints and loose pieces are repaired, the beams are treated, timber with a preservative and iron with cleaning and anti-rust primer, and the brick is painted or left natural. You gain height and character, but services can no longer run through the ceiling: lighting is solved with wall lights, track or well-planned surface conduit, and you hear more noise from the flat above.
  • Reinforce. If beams are damaged, the technician specifies the solution, which can range from repairing the beam ends or adding steel sections to replacing lengths of beam. This is structural work, with a project, a licence and technical supervision, and since it affects a common element the community must be involved.
  • Cover with a suspended ceiling. A plasterboard ceiling lets you run services, recess lights, add acoustic insulation and hide an air-conditioning unit in the bathroom or corridor. It does not touch the structure, but check the beams before closing up: once covered, nobody will see them for years.

The most common approach is a mix: exposed vaults in the living room and bedrooms, suspended ceiling in the corridor, bathroom and kitchen.

Technician and licence: non-negotiable

Taking down a reed-lath ceiling is interior demolition, but what it exposes is the building's structure, which is usually treated as a common element. Any work on it, from reinforcing or replacing a beam to cutting an opening in the floor, requires a qualified technician, a project and a works licence, as well as the community's agreement. Do not accept load estimates made by eye: the figures come from the technician, based on the actual condition of the floor. If the building is listed, extra conditions may apply. Confirm the procedure with the Ajuntament de Barcelona or ask us during the visit.

One more warning: removing false ceilings in buildings from before 2002 can reveal fibre-cement boards or ducts. If they appear, that part of the work stops and they are removed by a firm registered in the asbestos-risk register (RERA).

Indicative prices

WorkIndicative price
Full interior strip-out€40–70/m²*
Partition demolition€15–35/m²*
Painting walls and ceilingsfrom €8/m²*
Full renovation of a home (materials not included)from €300/m²*
Restoring an exposed vaultdepending on condition*
Structural reinforcementper technical project*
Plasterboard suspended ceilingper measured area*

*Indicative prices. Restoration is priced after seeing the floor structure, and reinforcement against the technician's project. You receive the quote in writing, itemised, before work starts.

How we approach it

  • Visit and inspection openings to identify the type of floor and its condition.
  • Inspection by a qualified technician if there are signs of damage or if you want to expose the ceiling.
  • Room-by-room decision: exposed, reinforced or covered.
  • Municipal paperwork and community agreement when the structure is involved.
  • Removal of the lath ceiling with the rest of the flat protected and debris taken to an authorised waste manager.
  • Repair, treatment and finish, or closing with a suspended ceiling.

If you have found vaults in your flat or suspect they are there, send us photos of the ceiling and, if you have one, of the inspection opening. We reply within 24 working hours, come to see it and send you a written quote, with each item separate and the technical part marked. Our labour carries a 2-year guarantee.

Frequently asked questions

Questions on this topic

The Catalan or timbrel vault is a technique: thin bricks laid flat and bonded with gypsum, in one or more layers. A revoltón is the small brick vault between two beams of a floor structure. In old Barcelona flats, what people call Catalan vaults is usually a beam floor with revoltones.

Removing the suspended lath ceiling is interior demolition, but it exposes the building's structure. First it is wise to make an inspection opening and have a technician check the beams. If they need reinforcing, you need a project, a licence and the community's agreement.

There is no general figure. It depends on the type and condition of the beams, the span and how they bear on the walls, and only a technician can calculate it after an inspection. If you plan to add significant loads, such as a built-in bath or a large bookcase, ask first.

No. Aluminosis affects concrete made with high-alumina cement, mainly precast joists in some mid-20th-century buildings. A floor of timber or iron beams with brick vaults has other risks, such as damp and corrosion.

It depends on the room. Exposed vaults add height and character; a suspended ceiling lets you run services, recess lights and reduce noise from the flat above. Many renovations combine both: exposed vaults in the living room and bedrooms, suspended ceiling in the corridor, bathroom and kitchen.

Request your quote

Reply within 24 hours on working days. The more specific you are, the more accurate our first estimate will be.

Required field