KONSTRUKT

Demolition

Interior strip-out of a flat in Barcelona: price per m² and process

· 6 min

Worker in safety glasses knocking down a brick partition wall with a sledgehammer during a renovation

A full interior strip-out of a flat in Barcelona costs, as a guide, between €40 and €70 per square metre of floor area, not counting debris removal, which is priced separately by volume. For a 70 m² flat that means €2,800–4,900* for the demolition itself, depending on what has to come out and how easy the building is to access. It covers partitions, wall tiling, floors, false ceilings, old services and interior joinery, and usually takes one to two weeks. If you only want to knock down one wall, that is priced per square metre of partition and is a different quote.

What a full interior strip-out includes

The aim is to take the flat back to its skeleton: load-bearing walls, floor slabs, façade and the building's shared downpipes. Everything else goes. A full strip-out quote normally lists these items:

  • Dividing partitions, brick or plasterboard, with their frames and lintels.
  • Bathroom and kitchen tiling, down to a wall ready for plastering.
  • Floors: porcelain, terrazzo or parquet, and the screed or mortar beneath if needed.
  • Plaster or board false ceilings, including mouldings if they are not being kept.
  • Services: wiring, back boxes, old pipework, radiators, water heater and sanitaryware.
  • Interior joinery: doors, built-in wardrobes and kitchen units.
  • Protection of common areas, isolating and capping supplies, and a final builder's clean.

What is not included unless you ask: façade windows (they are part of the façade and usually need a separate procedure), load-bearing walls and any material containing asbestos, which only a firm registered in the RERA (Spain's register of asbestos-removal companies) may remove.

Guide price by flat size

These totals apply the €40–70/m²* range to typical Barcelona floor areas. They exclude debris removal and any rebuilding work:

Flat sizeInterior strip-outGuide duration
50 m²€2,000–3,500*4–6 working days*
70 m²€2,800–4,900*6–9 working days*
90 m²€3,600–6,300*8–12 working days*
Debris removalby volume*in parallel*

*Guide prices. You receive the final amount in writing, itemised, after we have seen the flat.

You move towards the lower end of the range if the building has a lift, the partitions are light and there is a single layer of flooring. You move towards the top with solid brick, two or three floors laid on top of each other (terrazzo under parquet is common in Sants and Horta), tiling up to the ceiling, a narrow staircase with no lift or a street where loading is awkward, as in much of Ciutat Vella and Gràcia.

Phases of the strip-out

  • Visit and measurements: floor area, materials, number of layers, access and the debris loading point.
  • Written quote with demolition, debris and protection as separate items.
  • Municipal paperwork, notice to the property manager (administrador de fincas) and, if they sit on the street, authorisation for bags or a skip.
  • Protection: stair floors and walls, the lift, the entrance door and anything being kept.
  • Safe isolation and capping of electricity, water and gas inside the flat.
  • Removal of joinery, sanitaryware and kitchen; then ceilings, tiling, partitions and, last, floors.
  • Continuous debris removal, inspection of everything now exposed, and cleaning.

The order matters: work goes from top to bottom so the same debris is not walked over twice, and the floor comes up last because it protects the slab while everything else is demolished.

Common areas, neighbours and noise hours

Demolition is the phase the neighbours notice most. Before starting we cover the landing and the steps used to carry debris down with rigid protection board or cardboard, line the lift car if it is used and seal the flat door to contain dust. The staircase is cleaned at the end of each day.

Working hours are set by the city's noise regulations and often by the building's statutes or community agreements. In practice, noisy work happens on weekdays during the daytime, and many communities ask for the first hour and midday to be avoided. Confirm the exact hours with the property manager; we tell you in advance which days will be loudest so you can let the neighbours know.

What turns up once the flat is opened

A full strip-out is also a survey. In older Barcelona buildings it is common to find things that could not be seen at the visit, so it is worth allowing for them in the schedule and with a contingency in the budget:

  • Timber beams with damp or woodworm, or concrete joists in poor condition; a technical professional must assess them before work continues.
  • Catalan vaults hidden above a false ceiling, which can be restored or covered again.
  • Lead or galvanised-steel pipes and wiring with no earth.
  • Fibre-cement downpipes, ducts or sheets that may contain asbestos.
  • Hidden damp behind tiling and floors that are out of level by several centimetres.

If something like this appears, we stop work in that area, show you photos and give you the options and their cost in writing before continuing. Nothing is added to the quote without your approval.

Stripping out to renovate

Most full strip-outs are the first phase of a complete renovation. Doing it all with the same team has a practical advantage: whoever demolishes knows what will be built and keeps what will be needed, such as the downpipe connection, the boxes on the façade wall or a moulding worth saving in an Eixample flat.

If you are planning to strip out a flat in Barcelona or the metropolitan area, from Poblenou to L'Hospitalet or Sant Cugat, tell us the floor area and, if you can, send a few photos. We reply within 24 working hours, come to measure and send you a written quote with demolition, debris and protection itemised separately, before any work starts.

Frequently asked questions

Questions on this topic

At the guide rate of €40–70/m²*, a full interior strip-out of a 70 m² flat comes to between €2,800 and €4,900*. Debris removal is quoted separately by volume, and the final figure is set in writing after the site visit.

For a full interior strip-out the reference is the usable floor area of the flat, because partitions, floors, tiling, ceilings and services all come out together. If only part is demolished, each item is measured separately: square metres of partition, floor or tiling.

If the work does not touch the structure, the façade or common elements, the usual route is to file a comunicado de obras (works notification) with the Ajuntament before starting. If it affects load-bearing walls, floor slabs or a listed building, you need a technical project and a works licence. Confirm the exact procedure with the Ajuntament or with us at the visit.

As a guide, between 4 and 12 working days depending on floor area, how many layers need removing and how easy it is to get the debris down. A flat with no lift in Ciutat Vella takes longer than one with a roomy lift in Sant Martí.

It is not advisable. There is dust, noise, power and water cuts and areas with no floor. In a full strip-out the flat is normally empty from day one until the rebuild starts.

Request your quote

Reply within 24 hours on working days. The more specific you are, the more accurate our first estimate will be.

Required field